Complete CCTV Installation Guide for Your Home

CCTV cameras are the most important add-on to your home safety. Not only the corporate buildings but also people are installing CCTV cameras in their home to stay on the verge of safety and security 24 x 7.

The most important thing that you need to consider during the CCTV installation in your home is choosing the proper spot from where it can give the ultimate coverage. The corners in the indoors are the most preferred spot as it gives the maximum of visibility.

So, if you are thinking of how you can install CCTV in your home, this article is for you.  Here we are going to discuss how to install CCTV at any corner of your home step-by-step.

Camera Mounting

The first step for installing CCTV is mounting the camera properly. You need to pick a high place that covers most of the areas in your home. If you are installing it indoors, select a corner that covers the doors and other important areas.

In the case of outdoors, picking a place gives the proper coverage to doors, main gate, garden, and garage area. Place the camera at the place and mark the areas for drilling needed to mold the screws. Screw the camera properly. Make sure the fitting is steady. Insert the power cable in a socket.

DVR Placing

DVR refers to the box that holds the hard disk of the surveillance camera. The CCTV video recording gets saved in the DVR. The best place to keep the DVR is, inside a locked spot, from where no outsider or suspicious person can access the DVR.

A bulletproof security system can ensure the best of safety in your home if you are dealing with that much high risk in your life. However, life appears in unexpected situations.

Organize the Cables

It is essential for the cable length to be minimal as the long lines can cause line losses, affecting the video quality. Make a plan for the pathways to make the cables go straightway all the way from cameras to the DVR unit.

You can pick wire molding to keep the wires in one place properly, managed, and organized. Also, wire moldings enhance the safety of the wires so that no one can tear or cut those. Set the moldings in the path and put a high-quality surveillance wire inside the molding.

Connect the Wires Properly

It is vital to ensure the wires’ proper connection to get a good and clear video quality with less interruption. You can connect your wires with a BNC port. To connect the wires, remove a bit of the outer parts to expose the inside metal wire braids.

On the cable, slide the crimping barrel properly with the broader diameter facing towards the outer areas, up to the cable’s end. After attaching, remove the white insulator that covers the inner cables.

After that, you need to enter the exposed cable inside the port and attach it with the crimping barrel to ensure a proper connection. Now you need to connect the DVR output post and the screen you want to use for video streaming.

Start the System

The technician is now going to power ON the cameras, DVR, and the display. If you are doing it on your own, you can avail of the help from the user manual that comes with the complete CCTV parts set-up.

Set the DVR as directed in the manual. Confirm if each of the cameras is connected to the system and check if they are working correctly. 


Nevertheless, before opting for a complete CCTV installation in your home, you need to consider the factors to pick the best camera. You can avail help from the CCTV camera installation service providers to know the best angle for the set-up.

Make sure you are opting for the proper measurements to install the CCTV and get the best coverage from each angle with the clear video quality. Thus, we hope you find this article useful enough if you are thinking of installing a CCTV in your home.

Leave a Reply