Melbourne · Home Theatre & Automation

Where We Work

We work across Melbourne from two bases, at Epping and Truganina. These are the areas we know well enough to write about.

Book a consultation

Automation is not the same job in every suburb. What a house is built from decides where cable can go; whether it is a house or a lot in a block decides who has to approve the work; and whether it is finished or still framed decides what it costs. The pages below are written for specific places rather than pasted from a template.

Inner east

Period masonry, extensive heritage overlays, and a great deal more apartment stock than most people expect.

Home automation in Toorak — around half the suburb’s dwellings are flats or apartments and only about three in ten are separate houses. Solid masonry, slate roofs, heritage precincts, and owners corporations on a large share of the work.

Home automation in Hawthorn — the most apartment-dense of the three at 59.1% flats, nearly five times the state rate. Boroondara publishes unusually specific guidance on visible roof fixtures, which shapes where antennas and condensers can go before a design reaches council.

Bayside

Home automation in Brighton — a house-and-townhouse suburb at 79.6%, against Toorak’s 50.2%. Bigger homes, real grounds, a steady flow of new builds where prewiring is possible, and salt air that changes how outdoor equipment gets specified.

Inner north and north-west

A large share of our home theatre and automation work comes from the inner north-west, and the housing there is genuinely different again — Victorian and Edwardian cottages, interwar brick, warehouse conversions, and a lot of recent townhouse stock on old industrial land.

We regularly work in Essendon, Moonee Ponds, Ascot Vale, Coburg, Brunswick, Flemington, Maribyrnong, Parkville, West Melbourne, Kensington, Seddon, Yarraville, Footscray and Fitzroy. Dedicated pages for these are being written; in the meantime, call and we will talk through what your particular house needs.

Wider Melbourne

Beyond those, we work across the inner and eastern suburbs, the bayside strip, and the northern and western growth corridors from our Epping and Truganina bases — including South Yarra, Armadale, Malvern, Prahran, Kew, Camberwell, Balwyn, Canterbury, Hampton, Sandringham, Eltham, Warrandyte, South Melbourne, Albert Park, Port Melbourne and Williamstown.

New builds are worth a conversation early wherever they are. The decisions that cost money later — where the rack lives, which walls carry devices, how cable crosses the ceiling structure — are cheap to make while the drawings are still open, and expensive once the plaster is on.

What we do in all of them

Home automation on Control4, KNX and C-Bus. Home theatre and cinema. Lighting control. Networking. Security, CCTV, intercom and access control, under Victoria Police licence Z83-497-00S.

Talk to us about your project

Tell us where the house is and what you want it to do. Call 1300 428 226 or send us the details.

Get in Touch
AUCAM
Home Theatre & Automation

Home automation, cinema, lighting and security for Melbourne homes. Certified in Control4, KNX and C-Bus.

Services

Platforms & Areas

Contact

1300 428 226
info@aucam.com.au

12/82 Gateway Boulevard
Epping VIC 3076
03 7057 8184
4/71 National Drive
Truganina VIC 3029
03 7057 8185
© 2026 Aucam Home Theatre & Automation Pty LtdABN 97 671 665 679Security Adviser and Installer Licence Z83-497-00SPrivacy Policy